Exhaust Coating, High Heat Base Coat Black

High Heat Base Coat Black

High temperature capable (1300�F. +) Water based coating, no VOCs. Use under any Techline exhaust system coating to increase the protection that the top coating can withstand. HHBK can withstand extreme temperatures of 2000F plus. It is a water based coating with no V.O.C.s. Use under any Tech Line coating to increase the temperature that the top coating can withstand. Use on pipes O.D. under all coatings. This coating must be oven cured, and cures at 500�F. Water-Based and does not require etching after curing.

APPLICATION:

• Sandblast all parts 10X EpiX Blasting Media MP 70/100 Grit (EPIX), or 120 grit aluminum oxide. DO NOT USE GLASSBEAD.
• Clean metal using conventional cleaning methods, with acetone, lacquer thinner or other similar non-petroleum based solvent.
• When the surface is clean and dry, apply a thin even layer of coating using an airbrush, detail touch-up gun such as Columbia Coatings Ceramic Application Gun (CCAG2) or equivalent system that allows for application of a thin film build of approximately .001� to .0015.
• Avoid excessive build-up of material as this can lead to loss of adhesion. DO NOT APPLY A SECOND COAT AFTER THE COATING DRIES.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov